Make Cut-off Shorts And Extend The Life Of Your Favorite Pants
Posted Jul 23, 09 -Filed Under eco-friendly living ideas, reuse jeans, seasonal: summer, sewing | 2 Comments
Recycling 101; take your pants with the worn out knees and make them into shorts. This practice of re-using pants to make shorts is especially nice for kid’s cloths due to the tendency for children to prematurely wear holes in the knees.
How to:
Cut at the desired length (add extra if you want to leave a cuff).
Sew a hem, add a cuff or just leave it raw so it will fray.
These shorts were made from a pair of pants that my daughter loved. They had developed holes in the knees so I cut them into shorts and rolled up a cuff and hemmed the new edge. In addition, I cut out the flower detail that was at the bottom of the pants and re-sewed it on the shorts. It looks like I bought them this way.
Make Your Own Protective Sketchbook Pouch Out Of Jean Pant Leg
Posted Feb 4, 09 -Filed Under Uncategorized, crafts (recycled materials), gifts from recycled materials, party favors, reuse buttons, reuse fabric items, reuse jeans, sewing | 1 Comment
This protective sketchbook pouch made out of salvaged jeans is a great beginner sewer project.
1.
Find a pair of pants that are worn in the knees. Cut off one leg at the knee. Keep in mind that the width of the pant leg will determine the width of your pouch. Therefore use children’s pants if you want a small pouch.
2.
Think about what you want to put in your pouch: sketchbook, journal, phone/ address book, or diary. I put a sketch book on top of the leg to help gauge the size pouch needed. Make sure you leave room on the bottom for the seam. I cut off the bottom edge of the pants but you can leave it on if you like.
If the pants you are using are a straight leg, you may want to use the bottom edge of the pants at the top edge (This edge will end up on the front of your bag as the flap edge. The pants that I used had a little flare at the bottom and I liked the shape it gives to it.
Also determine the length you want the flap to be and cut.
3.
Lay your piece flat and face up, then cut out the front part of the pant leg where the flap is (see image). The back of the pant leg will flip forward and become the flap.
4.
Turn your pant leg inside out and sew the bottom seam or don’t turn it inside out and just sew across, leaving the seam on the outside (as seen in photo).
Also, decide on the shape you want your flap and cut. You can leave the edges raw so they will fray or you can turn the fabric under and sew. The jeans that I used had some stretch to them and I found out that they don’t fry as well as traditional 100% cotton jeans.
5.
Add button, snap or recycled jean button. I re-used a button from a pair of button fly jeans. When you cut it off the jeans, leave it attached to some of the jean fabric. I left it on a 1.5 inch square piece of jean fabric.
Mark where you want the jean button (if using) and make a small straight cut. Then, mark the position of the hole below by making a mark through the first hole. You should now have two holes lined up with each other and just big enough for the button. Do not make a hole in the back of your pouch: just a hole in the flap and in the front part of your pouch.
If using a regular button, you will still need to clip a small hole in the flap and mark the position below. Instead of cutting a second hole, sew on a button to the front of the pouch. Keep your eye out for fun vintage buttons for using in projects like this.
6.
From the inside of the pouch, put the jean button into the hole (see image). I didn’t think it was necessary but if your button is loose, you may want to add a few stitches to hold the button in place (sewing, fabric to fabric, a circle around the button).
7.
To close the flap, put the button through the flap hole.
8.
Here is a closer look at the button I used in this project. It was salvaged from a pair of button-fly jeans.
9.
Add a slot that will give you easy access to a pen or pencil. Cut a small hole just large enough for a pen or pencil to slip through (see arrow in photo). Only cut through the front of the pouch! Next sew a channel about ¾ of an inch from the edge of the pouch (see white line in image).
10.
That’s it, you’re done. Put in your notebook and your pencil and you are ready for a nature hike.
Also see other ideas for pant leg pouch, bag, or purse. Link
Versatile Pouch Made From Recycled Pant Leg
Posted Feb 4, 09 -Filed Under crafts (recycled materials), gifts from recycled materials, holiday crafts: Valentine's Day (recycled stuff), organize, party favors, reuse buttons, reuse fabric items, reuse jeans, sewing | Leave a Comment
This clever little pink pouch was designed by an eleven year old (my daughter). She independently came up with the idea to recycle the bottom part of a pair of old pants to make a pouch/ bag.
This project is simple enough to do at a children’s party. Kids will love designing their own unique pouch.
This pouch could also be used to hold your Valentine card collection. Do you have a collection of special Valentine cards already started? They would fit nicely into a home-made pouch. My daughters each have a small collection of valentine cards that grows each year.
Add a strap if you would like to make this pouch into a purse.
I think a pant leg pouch/ bag would make a wonderful eco-friendly gift wrapper too: place gift inside.
I used the design of this pouch and took it a little further: See my post for instructions on how to make a jean sketch book pouch.
How To Make A Greener Pet Bed: Use Reclaimed Fabric And Recycled Fiber Stuffing
Posted Dec 10, 08 -Filed Under Uncategorized, crafts (recycled materials), gifts from recycled materials, home décor (recycle and upcycle), reuse fabric from drapes or other, reuse fabric items, reuse jeans, sewing | 1 Comment
Try creating a pet bed out of a stained coat, damaged drapes, unwanted jeans, or an old wool blanket. Avoid the damaged areas when cutting out your pieces. Alternately you could use fabric remnants from fabric retailers. These scraps are usually sold at a discount. I made this bed out of a second hand curtain. The thick, neutral color fabric was perfect for the job. It is a good idea to pick sturdy fabric if making a dog bed. Make one for your cat too and she will shed on it instead of on your favorite chair. This project is easy enough for beginner sewers.
How to:
Determine the size you would like to make your pet bed. I started by cutting two squares of fabric 29 by 29 inches. With right sides together, sew around three sides (as indicated by the blue line) leaving one side open. Use a ½ inch seam allowance. Trim the corners off (also shown in blue) but be sure you do not cut your stitching. Turn your pet bed right side out. Now fold in the raw edges of the opening (about a half inch) and iron. You must do this before you sew the tunnels.
You could measure your pillow and do some division and re-measure and mark your tunnels… or fold your pillow in half and make a nice crease. Open it out flat. Fold the sides to the center this time (see photo) and crease. Use some pins to hold things in place then sew using the creases as your sewing guide lines. Depending on the size of your pet bed, you may have to do more folding first.
This is what mine looked like after I sewed the tunnels.
Stuff the tunnels. I filled mine with a soft recycled fiber stuffing (made from industrial textile waste). You might want to recycle the stuffing from an old pillow or stuff with scrap fabric pieces (collect the pieces that are too small to do anything else with.
All that is left to do is sew up the open side.
Because pet beds are so large I recommend you spot clean only. A carpet cleaner with an upholstery attachment works great!
To make a pet bed out of jeans, see my post on how to make recycled jean pillow covers.
Only a few modifications to those directions are needed. You will need to leave one end of the tunnels open for stuffing. Also, make the strips 6 to 8 inches wide for medium to large beds.
Jeans Recycled Into Durable Pillow Covers
Posted Mar 30, 08 -Filed Under home décor (recycle and upcycle), reuse jeans, sewing | 1 Comment
Fabric sewed together to form a long strip.
View of pillowcase inside-out.
Detail of the flap and the snaps.
These jean pillows also look good on my fading denim couch.
Casual comfort for your bed. If you are ambitious, a recycled jean duvet cover would look fantastic too! A duvet cover is just like an extra large pillow case.
Here is a quick guide to making durable recycled jean pillow covers.
First collect old jeans. Don’t worry if there are holes in the knees or frayed bottoms, you can work around those areas.
Second, you will need to cut the jeans into strips. I made a stencil four inches wide out of cardboard. It doesn’t matter how long. I traced the stencil on the jeans, making the strips as long as I could. Slide your stencil up or down to lengthen or shorten the strip.
You can choose to make your strips wider or narrower, whatever works for the jeans you are salvaging and the design you wish to make.
Next, sew the strips together end to end to form a long strip. This method results in a random pattern and allows you to get the most out of your fabric strips (reduces waste).
Then, figure out how big you would like your pillow cover. At this point you should consider whether to have the stripes go up and down or across. Cut the strips to length, remember to leave extra for seam-allowances- a half inch for each side is good (width) and add about 4 or so inches extra so you can fold the fabric over forming a flap (length). Sew your strips together to make two rectangles (the top and bottom of your pillow),
Last, simply sew your pillow pieces right sides together. Leave one side open. Finish that edge (fold over and sew). Try it on your pillow, use extra fabric to make a flap. Add snaps.
E-mail with your questions or comments.