Make A Super Cool Tipi Fort Using Recycled Materials

teepee

Although tee-pee is often spelled tee-pee (t-e-e-p-e-e), tipi (t-i-p-i) is considered the correct spelling. Tipi is a Sioux word formed from the word meaning to dwell or live- ti, and the word meaning used to live in -pi. Regardless of the spelling, they make a super cool fort.
Tipi poles:
1. I made my poles out of bamboo from a friend’s property. Start asking around to see who might have some. Bamboo grows quickly and spreads easily. I bet people with bamboo on their property would be glad to have you come by and harvest some. Use a hand saw to cut down and use clippers to cut off any side branches. Alternative: use straight thin trees with few if any side branches. The diameter of the poles should reflect the size of the tipi: a larger tipi will need thicker poles than a smaller tipi. Use your judgment: poles should be thick enough to support the cover without bowing in. You will need 11 or more poles for this extra large tipi; each pole should be 11.5 feet long. If you plan to use your tipi inside, like we do, make sure to make it a size that will fit. I have high ceilings so I was able to make a really large tipi. Smaller tipis don’t need as many poles. The toddler tipi fort I made had only 6 poles that were 64 inches long. Poles for a toddler tipi could also be made out of newspaper. Make long thick rolls of newspaper. Connect these rolls with some masking tape. Then add more layers of newspaper to reinforce the places where the tubes connect.
Making your tipi cover:
1. I used blankets from the thrift store; it took me several months before I found enough for this project. I think I pieced together about four blankets. I thought that these blankets looked vaguely like animal skins and had the benefit of not needing to be hemmed along the edges. To make it look more authentic, I hand-sewed the pieced together with imitation sinew, which is thick waxy cord, using a large upholstery needle. Sinew is what Indians traditionally used to sew skins with; it is made from the tendons of animals.
Sheets would also work well as a cover. The benefit of using sheets is that they are easy to find at second-hand shops; you might even have some old ones around your house. Also, especially if you are using white or another light color, the cover could be painted as many tipis often were. In addition, you may like that you can sew the sheets together with a sewing machine.
2. To make the shape of the cover:
paper tipi 1

paper tipi 2

To make it easier to visualize, I made a paper model. Note that the tipi shown here is in the shape of an inverted cone. Usually a tipi would be in the shape of a tilted cone: the floor would be in an egg shape and when viewed from the side you could see the back was steeper then the front. We ignore this fact for purposes of this play tipi. To make the cone-shaped cover you will first need to decide how big you want your tipi. Remember that the height of your tipi will not be as tall as the poles, ie: make the poles longer than the desired height plus extra to extend out the top. Determine the length of the tipi side (A to B in image). Your fabric can be folded in half like in the image or you can lay the fabric out and cut out the resulting semicircle. I had someone hold a string (cut to the length of the tipi side) at point A. I then marked the distance while swinging the string in an arc.

Add smoke Flaps, for decorative purposes, if you like. Smoke flaps were used to help direct the flow of smoke. If it rained, the smoke flaps could be closed. Also cut a door. A smaller door would have been more authentic but I thought wildly playing kids would have an easier time getting in and out.
3. You can make a door out of some of the left-over cover material and two sticks. Turn over the fabric and sew a channel for the stick (as I did on the top of my door) or slice small holes and weave the stick through (as I did on the bottom of the door).

tipi door detail -sticks

tipi door open

Flip door to the side if you want to leave the door open.

Setting up your tipi:

tipi setup 1
2. Tie four poles together about 18 inches from the top (traditional tipis had a lot more pole extending out the top). Then stand the poles up. (Smaller tipis can have less pole extending out.)
tipi setup 2

3. Arrange other poles (11 or more total) for a x-large teepee.

tipi setup 3
4. Apply the “skin”. (Have your covering folded in half with the good side on the inside of the fold. Placing center back into place first then unfold the other side.

tipi setup 4
5. Arrange the cover. I used large safety pins to close the front (not authentic of course but easy). The next time I set up our tipi I think I’ll try “pinning” it up the front with sticks in the traditional way.

tipi setup5 with door

Fake Christmas trees are perfect for this imaginative play. I got mine second-hand of course.

tipi door detail

Tie the ends of the top stick to the tipi.
I couldn’t capture in pictures how cool it feels being inside. Furthermore, it is surprisingly spacious (an adult can stand in it and sleep inside) yet it has a very cozy feel. Your kids will want to make up their own Indian names like: Eagle Feather, Big Bear, Dancing Deer…

10 thoughts on “Make A Super Cool Tipi Fort Using Recycled Materials

  1. Julie Spotted Eagle Horse Martineau

    As a member of the Oglala Sioux tribe, and a proud Sioux woman, I would prefer that you rephrase some of the wording in the article out of respect for Native peoples, and as the proud owner of 3 full size tipi’s myself, I also wanted to give a few extra bits of advice (two 18 foot and one 9 foot Tipi’s of my own!) based on personal experience.
    First, I would use three poles for the base for the rest of the poles. This makes construction a LOT easier and also gives more authenticity to what you are doing. You want sort of a leaning pyramid shape with one pole obviously leaning in to the other two. You can google images of tipi tripods for a visual of what you are doing. With my full size ones, I lay two of my designated tripod poles parallel on the ground, and lay the third at a right angle to the other two so that it crosses them, and then lash them together and then stand them up, moving one of the parallel poles out to create a triangle shape, similar to the shape depicted in the photos above.
    Depending on how many poles you use, you want to lay a third of them into the tripod on the left side, then another third on the right, and then the final third in the back, leaving the longest pole out of the pile, and leaving a space for the missing pole.
    We tie the cover on the longest (and usually sturdiest!) pole, which is called “the lift pole” (as you ‘lift’ the canvas on the frame this way) and place it in to the hole left on the back side.
    Roll the canvas around so that it meets to one side of the leaning pole (this forms your door) and lace the cover together.
    For the smoke flaps (the flaps hanging to either side of the top) we have special pieces of fabric sewn on to create a pocket, and special poles for arranging the flaps to control ventilation in the Lodge, as well as special ropes at the outside bottom corners to help maneuver them the way we want them, and they would add a bit more authenticity as well.
    You can see pictures of all three of my Lodges (another word for a Tipi) on my myspace page, as well as pictures of us putting up one of our Lodges, from start to finish for more inspiration!

  2. Pingback: Allerlei für Kinder: Recyclinks zum Wochenende « Mehr mit weniger

  3. Pingback: Savvy Housekeeping » 10 Ways To Reuse An Old Bed Sheet

  4. Pingback: Budget Styles: Just What Can You Do with Old Bed Sheets? « Casa Diseño LLC

  5. Pingback: Boat People's vintage and DIY fashion blog - your daily source of OMG

  6. Holly

    Hi, I love this article. Just pinned it. Thanks for the practical miniature idea. I was trying to figure out how much cloth I would need and how to cut it and this really helped.

    So after the main tripod, you just lay the other poles in place? They dont fall over?

    Please reply!
    citrusholly at gmail

  7. Pingback: Fort Friday

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>